Abit NF-95 Bedienungsanleitung PDF herunterladen (Seite 39)

BIOS Setup

NF-95 3-11

IDE HDD Block Mode

Block mode is also called block transfer, multiple commands, or multiple sectors read/write. If

your IDE hard drive supports block mode (most new drives do), select Enabled for automatic

detection of the optimal number of block reads/writes per sector the drive can support.

 Onboard Device

Click <Enter> key to enter its submenu:

Init Display First

This item allows you to choose the primary display card.

On-Chip USB Controller

This option enables or disables the USB controller.

- USB Keyboard Support via

Select [BIOS] (the default setting) for the legacy operating system (such as DOS) that does

not support USB keyboard.

- USB Mouse Support via

Select [BIOS] (the default setting) for the legacy operating system (such as DOS) that does

not support USB mouse.

On-Chip Audio Controller

This option enables or disables the audio controller.

Onboard LAN Controller:

This option enables or disables the LAN controller.

- LAN Boot ROM:

This item allows you to use the boot ROM (instead of a disk drive) to boot-up the system and

access the local area network directly.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 55 56

Keine Kommentare

Abit NF-95 Bedienungsanleitung Seite 39