Abit NF-95 Bedienungsanleitung PDF herunterladen (Seite 40)

 SuperIO Device

Click <Enter> key to enter its submenu:

Onboard FDD Controller

This option enables or disables the onboard FDD controller.

Onboard Serial Port

This item determines which I/O addresses the onboard Serial Port controller will access.

[Auto]: The system automatically select an I/O address for the onboard Serial Port.

[3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allows you to manually select an I/O

address for the onboard Serial Port.

[Disabled]: Disables the onboard Serial Port.

Onboard Parallel Port

This item specifies the I/O address used by the parallel port.

[Disabled]: This option prevents the parallel port from accessing any system resources. When

the value of this option is set to [Disabled], the printer port becomes unavailable.

[378/IRQ7]: This option allows the parallel port to use [378/IRQ7] as its I/O port address.

The majority of parallel ports on computer systems use IRQ7 and I/O Port 378H as the

standard setting.

[278/IRQ5]: This option allows the parallel port to use [278/IRQ5] as its I/O port address.

[3BC/IRQ7]: This option allows the parallel port to use [3BC/IRQ7] as its I/O port address.

- Parallel Port Mode

This item specifies the parallel port mode.

[SPP]: (Standard Parallel Port) Allows bi-directional parallel port operation at normal speed.

[EPP]: (Enhanced Parallel Port) Allows bi-directional parallel port operation at maximum speed.

[ECP]: (Extended Capabilities Port) Allows bi-directional parallel port operation at a speed

faster than the normal mode’s data transfer rate.

3-12 NF-95

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 55 56

Keine Kommentare

Abit NF-95 Bedienungsanleitung Seite 40